900 Series Special Function Modules

900 Series Special Function Modules

5000 Series Wireless Tuner Module

5000 Series Wireless Tuner Module

WTU-M9800

The WTU-M9800 tuner may be used in any TOA mixer that accepts a 900 series module. Each module is a diversity UHF receiver with 16 user selectable frequencies. Up to two modules may be used in a frame without the use of an external power supply. A wide range of M band transmitters is available, as all 5000 series microphones and belt packs are compatible with WTU-M9800. Two whip antennas on standard BNC connectors are included. Phantom power on the antenna inputs supports the use of TOA’s YW-4500 Q powered remote antennas.

*When ordering the WTU-M9800, use with WM-5xxx M1 (suffix AM RM1 D00) transmitters (microphones) only

900 Series SIP Module

900 Series SIP Module

SP-11N-AM

The SP-11N is a VoIP phone paging module supported SIP (Session Initiation Protocol) with Auto-answer  function. It can be connected to an IP network and directly registered as one SIP phone station on various SIP server management software. It also has VOX and mute functions designed for use with TOA’s 9000M2, 900, 700 and BG-2000 series amplifiers.

Equalization for Speakers

Equalization for Speakers

E-03R

The E-03R is a controller module for F-121C/121CM to be used in conjunction with the 900 series modular mixers and amplifiers (MK2 and A series) .Processor modules for TOA speakers. Connects between pre-amp output and power amp input. Includes dual RCA cable.

Equalization for Speakers

Equalization for Speakers

E-04R

The E-04R is a controller module for H-1 to be used in conjunction with the 900 series modular mixers and amplifiers (MK2 and A series) . Connects between pre-amp output and power amp input. Includes dual RCA cable.

Equalization for Speakers

Equalization for Speakers

E-05R

The E-05R is a controller module for H-2, H-2WP to be used in conjunction with the 900 series modular mixers and amplifiers (MK2 and A series) . Connects between pre-amp output and power amp input. Includes dual RCA cable.

Noise Masking Module

Noise Masking Module

NM-01

The NM-01 is a noise masking module to be used in conjunction with TOA’s 9000M2, 900, 800D, 700 and BG-2000 series amplifiers. This module generates a noise source to be used for sound masking and audio privacy applications. Such applications include open-plan office environments or smaller spaces where distracting or private conversations need to be made unintelligible. The module allows connection of optional external signal processing equipment (e.g. an equalizer), as required. A simple contact allows for muting of this noise source, if desired.

1 kHz Sine Wave Test Tone

1 kHz Sine Wave Test Tone

S-01S T

Generates 1 kHz sine wave tone via switch-closure. Ideal as a test tone for the audio system.

Buzzer/Yelp Tone Generator

Buzzer/Yelp Tone Generator

S-02S T

Generates buzzer and yelp tones via switch-closure.

Switch-Selectable Tone Generator

Switch-Selectable Tone Generator

S-04S T

Generates one of four tones via switch-closure. Can be used for doorbell, paging, door/gate release, telephone night ringer, annunciator, class change or pre-announcement tone.

Balanced Line Output

Balanced Line Output

T-01S

For transformer-isolated output of mixing bus signal to feed other mixers, amps and tape recorders. (NOTE- For use in A-700, A-900MK2, M-900MK2, W-900A, A-9000M2, M-9000M2 and BG-M Series; not compatible with the P-900MK2 or BG-2000 Series products).

Unbalanced Line Input with Music-On-Hold Output

Unbalanced Line Input with Music-On-Hold Output

T-02S

For unbalanced, line level equipment. Transformer-isolated output of module's input signal for feeding remote equipment such as mixers, amps, tape recorders and telephone system music-on-hold inputs.

Unbalanced Line Input with Music-On-Hold Output and Input Mute-Receive

Unbalanced Line Input with Music-On-Hold Output and Input Mute-Receive

T-12S

For unbalanced, line level equipment. Transformer-isolated output of module's input signal for feeding remote equipment such as mixers, amps, tape recorders & telephone system music-on-hold inputs. Responds to mute bus activation (output uninterrupted).

Remote Master Volume Control(VCA)

Remote Master Volume Control(VCA)

V-01S

The V-01S is a plug-in type VCA module designed to be used in conjunction with TOA's 900 Series and BG-2000 Series amplifiers. Its 3P terminal block is equipped with a 24 V output that supplies power to an external controller, and a control input. The gain between IN and OUT is set within the range of –100 to 0 dB referenced to the 0 – 10 V control voltage.

Scroll to top